|
Juicers and Healing Products of Australia |
|
LB Healing Products
LB Healing Products
International: |
Current
Category
This 80 Watt capacity panel in the range has an array of 36 Polycrystalline cells and can charge batteries in virtually any climate. This panel can be used to power a Shurflo or Dankoff 12 volt DC pressure pump, without batteries, but must include a LCB (Linear current booster) to help start. Specifications: Voltage (@ Pmax): 17.6V Price:
12V 20 Amp Super Solar Panel Regulator With a massive 20 amp current handling, this switchmode solar panel generator is light weight, easy to install and does not require a heat sink. It installs easily and features automatic operation, LED Power indication and boasts an efficiency up to 99.2% @ 20 amps. Not only does the regulator switch the solar panel in and out depending on the battery voltage, the regulator will disconnect the solar panel after approx. 20 minutes at night fall to prevent any losses into the panel overnight. Completely automatic, Australian Made. Battery or Solar Power LED indication Price:
1,500 Watt (2500) Electrically Isolated 24VDC to 230VAC Pure Sine Wave Inverter With an input of 24V DC, this inverter can be used in trucks, buses, semi trailers or fixed installation 24V battery tanks. It features electrical isolation between battery and mains voltage for increased safety. The inverter is housed inside a rugged metal enclosure with base mounting fins and features two cooling fans on the rear with a ventilation window on the front. The front panel has a power switch, LED indicators for overload, over-temp, and power, and two mains sockets. It bristles with protection circuits including battery over/under voltage alarm, over temperature alarm, overload and short circuit protection and much more. The high power output of this inverter makes it suitable for all manner of power tools, lights, televisions, microwave ovens, Hi-fi, computers and so much more. Output Power: 1500W Continuous Price:
100 Watt (2000W Surge) Electrically Isolated 12VDC to 230VAC Pure Sine Wave Inverter We have decided to include this 1000W Sine Wave Inverter in our range as a lower priced alternative, but be assured it works extremely well. It is electrically isolated between the battery and secondary voltage, and can be permanently mounted. The front panel includes the on/off switch, power on indicator and overload and over temperature indicators, as well as the mains output socket. The rear panel houses the cooling fan and 12V input terminals, which will accept 2 gauge cable (10mm Dia.). It is protected against the following: Low Input Voltage And there is a low battery alarm at 10.7V and shutdown at 10V approximately. Typical applications are TV's, microwaves, power tools, small fridges, computers etc. Output Power: 1000W Continuous Price:
500 Watt (1000W Surge) 12VDC to 230VAC Electrically Isolated Pure Sine Wave Inverter This excellent Inverter is rated at 500 Watts continuous output and is electrically isolated between battery and secondary voltage. The unit is designed for fixed mounting and high performance. Housed in a strong aluminium case, the inverter features heavy-duty crew down input connectors, cooling fan, 3-pin 230VAC output socket, on/off switch and LEDs to indicate normal operation, overload condition and over temperature. The inverter output is fully protected against short circuits and overload. Typical applications are laptop computers, power tools, blenders, small fridges and microwave ovens. Specifications: Output Power: 500W Continuous Price:
all prices quoted in Australian Dollars except where indicated web design & e-commerce implementation by LocalDirect 2001 |